Kore Essentials Tactical Gun Belt 1.5 - X5 Buckle Black

$ 30.99

4.5 (309) In stock

Description Includes: X5 Buckle, Tactical Gun Belt 1.5", hex wrench & set screws Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time. GUN BELT SPECS Hidden track with 40+ sizing positions (1/4” increments) Reinforced Power-Core center supports loads up-to 8 lbs Interchangeable with 1.5" wide EDC gun belts & buckles Large teeth clamp and screws secure belt-to-buckle Belt Width/Thickness 1.5” / 5 mm Load Rating Up to 8 lbs / IWB, OWB or Appendix Size Range Fits 24” - 54” Buckle Material / Finish Alloy / Powder Coat Buckle Size / Weight 3.5” x 1.75” / 3.5 oz. Adjustable Track Provides over 40 - ¼” size positions Belt Reinforcement Power-Core™ Center for added stiffness & support. Virtually indestructible
Description Includes: X5 Buckle, Tactical Gun Belt 1.5, hex wrench & set screws Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time. GUN BELT SPECS Hidden track with 40+ sizing positions (1/4” increments) Reinforced Power-Core center supports loads up-to 8 lbs Interchangeable with 1.5 wide EDC gun belts & buckles Large teeth clamp and screws secure belt-to-buckle Belt Width/Thickness 1.5” / 5 mm Load Rating Up to 8 lbs / IWB, OWB or Appendix Size Range Fits 24” - 54” Buckle Material / Finish Alloy / Powder Coat Buckle Size / Weight 3.5” x 1.75” / 3.5 oz. Adjustable Track Provides over 40 - ¼” size positions Belt Reinforcement Power-Core™ Center for added stiffness & support. Virtually indestructible Belt Material Nylon Outer / Super Fiber Inner Belt Tip Keeper Included Interchangeable All X Series Gun Buckles + Western Collection Buckles SIZING GUN BELTS Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44 [XL & Tactical belts up to 54] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3. Using the wrench that is included, loosen the screws on the back of the buckle. Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. Tighten the screws until they are flush with the buckle. You will get resistance. Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug. Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.